Power |
Guide No. (ISO100).meters |
60 (200mm)1 |
|
Zoom |
Zoom head |
Auto/Manual |
|
Focal length coverage |
24-200mm |
|
Coverage with wide panel |
14mm |
|
Auto zoom for sensor size |
Yes |
|
Flash modes |
Auto exposure control |
E-TTL II / E-TTL |
|
High speed sync (FP) |
Yes |
|
Manual / output settings |
Yes - 1/1 to 1/81922 |
|
Manual steps |
1/3-stops |
|
Continuous shooting priority (CP) mode |
Yes |
|
Continuous flashes in a burst |
Maximum at full power: Approx. 1703 |
|
Strobe / output settings |
Yes - 1/4 - 1/8192 (1/128 for optical transmission) |
|
Stroboscopic Frequency |
1 - 500Hz (199Hz using optical receiver function) |
|
Flash-related function |
FE lock |
Yes |
|
FE memory |
Yes |
|
Flash Exposure Compensation |
±3 stops |
|
Flash Exposure Bracketing |
±3 stops |
|
Second-curtain flash sync |
Yes4 |
|
Modelling flash |
Yes |
|
Modelling lamp |
2 x LED |
(duration, brightness and colour temperature user selectable) |
|
Colour temperature info communication |
Yes |
|
Wireless flash |
Transmitter |
Yes |
|
Transmission type |
Optical / Radio |
|
Transmitter range (Optical / Radio) |
Indoors: 0.7-15m / 30m (approx.)5 |
Outdoors: 0.7-10m / 30m (approx.)6 |
|
Receiver |
Yes |
|
Max. number of Transmitters / Receivers |
Optical: Unlimited / Unlimited |
Radio: 15 / 15 (16 in total of any combination) |
|
No of groups (Optical/Radio) |
3 (A/B/C) / 5 (A/B/C/D/E) |
|
No of channels (Optical/Radio) |
4 / Auto, 15 |
|
Remote Shutter Release |
Yes |
|
Flash head movement |
Up |
45, 60, 75, 90, 120° |
|
Down |
7° |
|
Left |
60, 75, 90, 120, 150 and 180° |
|
Right |
60, 75, 90, 120, 150 and 180° |
|
AF Assist |
AF Assist Beam |
Yes |
|
Number of AF points supported |
1 - 191 |
|
AF-assist beam type |
Infra-red / Emitting small series of flashes |
|
Power Source |
Battery |
1 x Rechargeable Lithium-ion Battery |
|
Battery Level Indicator |
Yes7 - 5 levels / percentage |
|
Minimum recycling time |
Approx. 0.1 - 0.9 sec8, 9 |
|
No. of flashes (fully charge battery) |
Approx. 335 (at full power) to 234510 |
|
External power supply |
Yes - optional Compact Battery Pack CP-E4N11 |
|
Construction |
Dust and water resistance |
Yes |
|
Active cooling |
Yes - internal fan |
|
Mounting foot material |
Metal |
|
Misc. |
Custom Functions |
14 (9 personal functions) |
|
Flash settings from camera menus |
Yes12 |
|
External flash exposure sensor |
Yes |
|
PC terminal |
Yes |
|
Accessories |
Included |
Battery Pack LP-EL |
Battery Charger LC-E6E |
Speedlites Case |
Mini Stand |
Bounce Adapter SBA-EL |
Colour Filter SCF-ELOR1 |
Colour Filter SCF-ELOR2 |
|
Optional |
Speedlite Transmitter ST-E3-RT (radio) |
Speedlite Transmitter ST-E2 (optical) |
EX series Speedlites with receiver function |
Compact Battery Pack CP-E4N |
Battery Magazine CPM-E4 (for use with CP-E4N) |
Off-Camera Shoe Cord OC-E3 |
|
Dimensions & weight |
Size (W x H x D), mm |
84.4 x 149.0 x 136.4 mm |
|
Weight, grams |
572g (body only) |
687g (body + battery) |
|
Guide number 60 measured for meters at ISO 100 and 200mm zoom head setting. |
Minimum flash output is 1/128 for high-speed sync or optical wireless transmission. |
At 23 degrees C, with the fan set to ON, and before reaching flash firing restriction Level 1, with no flash adapters fitted (bursts up to 160 full power flashes with the flash zoomed from 150-200mm). |
Shooting wirelessly (radio only) requires EL-1 as sender with a compatible camera. |
Without any obstructions between sender and receiver, and without external optical/radio interference. Arrangement of units and other external factors may affect the range/performance. |
Without any obstructions between sender and receiver, and without external optical/radio interference. Arrangement of units and other external factors may affect the range/performance. |
Indicates the remaining capacity of the internal battery only, not external power sources. |
1/8192 to 1/1 power charging time required for firing. |
Attaching CP-E4N with Ni-MH batteries, reduces the recycle time to approx. 0.1-0.4sec and increases the number of full power flashes to approx. 680. |
Attaching CP-E4N with Ni-MH batteries, reduces the recycle time to approx. 0.1-0.4sec and increases the number of full power flashes to approx. 680. |
Attaching CP-E4N with Ni-MH batteries, reduces the recycle time to approx. 0.1-0.4sec and increases the number of full power flashes to approx. 680. |
With compatible cameras |